sub
Your are here : HomeProducts UM-110

Vertical Machining Center

UM-110
UM-110
  UM-130
UM-130
  UM-150
UM-150
  UM-160
UM-160
  UM-180
UM-180
  UM-210
UM-210

 

UM-110

  • Increased capacity, improved capacity and better all around performance.
  • Heavy-duty linear guide ways in all three axes.
  • 24-station, swing-arm automatic tool changer .
  • High speed 6000/6000 rpm
  • Belt driven spindle design
  • Table dimension: 1200 x 600 mm
  • FANUC 0i-M controller with LCD monitor
Print Get Info
UM-110
UM-110
ITEM / MODEL UM-110
Controller FANUC 0i - M
SPINDLE
Spindle speed rpm 6000
Spindle nose taper -  BT 50
Bearing inner diameter mm 90
Drive system - Belt
TRAVELS
X-axis travel mm 1100
Y-axis travel mm 550
Z-axis travel mm 550
Spindle nose to table mm 150~700
TABLE
Table dimension mm 1200 × 600
T-slot (No. of T-slot × width × pitch) mm 5 × 18 × 100
Max. weight on table kg 1200
FEED RATES
(X/ Y/ Z) Rapid traverse rate m/min 30 / 30 / 30
Cutting feed rate m/min 12
Ball screw diameter mm Ø 45
Guideway type  - Linear
AUTOMATIC TOOL CHANGE SYSTEM
Tool magazine capacity pcs 24 (32)
Max. tool weight kg 15
Max. tool diameter mm 110
Max. tool diameter without adjacent tools mm 200
Method of tool exchange - Arm type
Max. tool length mm 300
MOTOR
Spindle motor power< Cont. / 30 min> kW 15 / 18.5
X/Y/Z feed motor kW 3 / 3 / 4
Coolant pump motor<50 Hz / 60 Hz> kW 0.53 + 0.85 / 0.75 + 1.27
OTHERS
Air supply kg/cm² 5.5
Machine weight kg 10000
Machine dimension (L × W × H) m 3.0 × 2.2 × 3.0
Note: The manufacturer reserves the right to modify design and specifications of the machine without prior notice.